10 Jun 2023 02:17 PM
It looks to be correct.
11 Jun 2023 08:08 PM
@mae-3 @Hey I'm currently trying to set up the Tp link and I've put into the openreach socket and it not picking the internet up, the internet light is just flashing now and then. And ideas?
11 Jun 2023 08:11 PM
If one has set up the TP-Link as a VDSL2 bridge to ethernet (VLAN 101) and connected the Asus and set up it with the instructions in the thread then it should authenticate with Sky and connect.
11 Jun 2023 08:39 PM
@mae-3 I've plugged the tp link into the open reach socket on the wall but the internet light won't stay solid just flashes now and then, goes solid for about 2 seconds and then flashes again.
11 Jun 2023 08:42 PM
Is the TP-Link configured connected to the Asus with the correct DHCP Option 61 credentials?
11 Jun 2023 08:45 PM
@mae-3 I've not connected it to anything else yet. I thought I need to connect to the wall first set it up and put it into bridge mode? Also my devices in the house are stick picking up the old sky router even though it's unplugged is this normal
11 Jun 2023 08:48 PM
The TP-Link and Asus together need setting up and it will not remain connected on its own without configuration, eg: it isn't plug-and-play. And one can set up the wireless SSID to the same as the Sky unit if it makes life easier.
11 Jun 2023 09:08 PM
@mae-3 I've got it on I'm just setting it up now, it, do I need to enable VLAN id?
11 Jun 2023 09:09 PM
Posted by a Superuser, not a Sky employee. Find out more
Enable and set to 101 on the tp link
11 Jun 2023 09:09 PM
Yes, on the TP-Link and it should be set to a VLAN of 101 for VDSL2.
11 Jun 2023 09:15 PM
@mae-3 @cookiemonsteruk I've done as you guys have suggested and it's in bridge mode. It's still plugged into the sky hub, shall I plug the asus into the tp link now and get them set up together and then disconnect the tp link from the sky hub when I'm done? Then plug the tp link into my openreacn socket?
11 Jun 2023 09:20 PM
Yes, set up the Asus with the credentials 'anything@skydsl|anything' whilst connected to it by LAN with the WAN port disconnected currently. Then disconnect Sky Hub and connect TP-Link to the broadband line and Asus to the TP-Link by ethernet taking note of the port you have used to set it for LANx ethernet to the WAN port of the Asus. It should then connect...
11 Jun 2023 10:18 PM
11 Jun 2023 11:10 PM
Yes, those are the correct credentials for DHCP Option 61 that you have provided.
11 Jun 2023 11:22 PM
@mae-3 I thought I'd done everything but when I disconnected everything and plugged the tp link into the wall the internet was present. If I log in the tp link now it's got this screen
No problem. Browse or search to find help, or start a new discussion on Community.
On average, new discussions are replied to by our users within 4 hours
New Discussion