sky puck cable

[hairybob]

Hi, I have two tv's in a summer house for watching sport mainly. Do I need a separate ethernet cable for each puck ? A the moment I have one cable and a splitter wich doesn't want to work. Only one puck will work at one time. Both work separately as I have checked.

Any advice appreciated.

[Jones_The_Cat]

---

@hairybob wrote:

Hi, I have two tv's in a summer house for watching sport mainly. Do I need a separate ethernet cable for each puck ? A the moment I have one cable and a splitter wich doesn't want to work. Only one puck will work at one time. Both work separately as I have checked.

Any advice appreciated.

---

What broadband speed to you get and what kind of splitter are you using? You really need an ethernet switch like this one in order to have multiple ethernet cables providing broadband to multiple devices. 

You could always try using WiFi if it reaches your summer house. 

[mikealanr]

Hi @hairybob 

You would need to use a switch. The ethernet cable from your house / router to the switch and two other cables from the switch to each puck.

You can get them relatively inexpensively on Amazon: https://www.amazon.co.uk/Network-Hubs-Switches/b?ie=UTF8&node=430573031

Hope this helps.

MikeAlanR

[hairybob]

Thanks for the quick reply, not being very tech savvy, i'm guessing a switch is a posh splitter ? Just to be sure, one cable from the router into the switch will run both pucks at the same time ?

[Jones_The_Cat]

---

@hairybob wrote:

Thanks for the quick reply, not being very tech savvy, i'm guessing a switch is a posh splitter ? Just to be sure, one cable from the router into the switch will run both pucks at the same time ?

---

You would connect an ethernet cable from your router to the switch, then two more ethernet cables from any other ports on the switch to each puck. 

Both pucks will then receive your broadband and should work as long as your broadband is fast enough to support it. Sky Stream needs around 25-30Mbps minimum for one puck. 

[hairybob]

Thats great, i'll shall try that. appreciate the help,

Live long and prosper.

[TimmyBGood]

@hairybob 

A 'switch' in this context is better understood as a multiplier, and permits numerous ethernet devices to be in use.

Although there are passive devices called an 'ethernet splitter' these won't do what you want: they 'split' a single gigabit eight strand cable into two separate four strand 100Mbs ethernet cables which is almost never actually appropriate.