Lost screws for stand

[MJH7]

Hello,

please can you let me know the type and size of screw to fit the sky glass tv on the stand to go into the washers. Thanks 

[Tim+Adams · Accepted solution]

Hi @MJH7 

The link below will help, please check if you need instructions A or B.

https://www.sky.com/help/articles/sky-glass-stand-assembly-guide 

Thanks,

Tim

[Marielathers]

The instructions don't tell me what size screws to use to attach TV to the stand? 

[TimmyBGood]

@Marielathers 

The television hooks onto the Sky-supplied stand using the four lugs on the top edge of the load-bearing plate: it's not screwed in place.

If you are using a stand from a different manufacture, Sky does not specify the fixings to be used because those may be specific to the third-party design. The mount points on the rear of the Glass set are VESA standard.

[delboy2028]

M8 x 45mm screws (x4)

M8 x 20mm screws (x4)

M4 x 6mm Phillips screws (x2)

[MrTicTak]

Hi, the diagrams don't mention these four screws at the rear: M6x20mm x 4. Do not rely solely on the load-bearing plate lugs.