0

Discussion topic: Technical fault whilst replaying recorded programs. This includes old programs.

Reply
This message was authored by: Disgruntled3

Technical fault whilst replaying recorded programs. This includes old programs.

  •  
Reply

All Replies

This message was authored by: Daniel0210

Re: Technical fault whilst replaying recorded programs. This includes old programs.

Posted by a Superuser, not a Sky employee. Find out more

@Disgruntled3 

First thing to perhaps try is a reboot of the box. Try a reboot of the main Sky Q box, then once that’s back up and running do the same with any mini boxes if necessary-
~ Using the remote put your main Sky Q box into standby
~ switch the box off at the plug
~ wait at least 30 seconds and then switch the box back on at the plug
~ follow the on screen instructions
~ when the screen goes blank and the blue Q stops pulsating wait another 30 seconds
~ press the 🏠 button


▪️I AM NOT A SKY EMPLOYEE (undercover or otherwise)▪️
Sky customer since 2001
with: Sky Q | Sky Superfast Broadband | Sky Talk | Sky Mobile
NOTE: I only provide help on the forums and NOT via PM
This message was authored by: oldfella

Re: Technical fault whilst replaying recorded programs. This includes old programs.

Posted by a Superuser, not a Sky employee. Find out more

@Disgruntled3 wrote:
  •  

Hi @Disgruntled3 

Try a Reset Settings in the Q box hidden menu.
To enter hidden menu press Home and navigate down to Settings but do not select Settings.
With Settings highlighted press 0 0 1 Select.
Only Carry out the first Reset (Reset Settings) as the other two will wipe all recordings.
After the Reset you will have to re pair your Bluetooth remote If you use one.
If you cannot switch the Q box on with the remote after the Reset press the Standby button (Amber led) on the front of the box.
To re pair the remote press 1 & 3 together on the remote and follow onscreen instructions to re pair.

Make sure that you are pointing the remote at the Q box when you press 1 & 3 together.

Resetting the settings will also reset:

Audio visual settings, such as picture resolution and HDMI control
Settings changed within the hidden engineer menu, include LNB type. If on a communal dish you need to reset the LNB to SCR in the hidden menu. After changing the LNB type you need to reboot the Q box.

Reply