8

Discussion topic: No satelite signal on mini box

Reply
This message was authored by LindaPatt This message was authored by: LindaPatt

No satelite signal on mini box

The main Sky Q box is working fine although I had to reset it earlier because it wouldn't switch on from standby & the tv attached to the mini box said no signal. The mini box still shows no satelite signal even though I've followed all the troubleshooting procedures. The main box shows the mini box is attached & ready to use. Any ideas would be appreciated 


Best Answers
This message was authored by oldfella This message was authored by: oldfella Answer

Re: No satelite signal on mini box

Posted by a Superuser, not a Sky employee. Find out more

@LindaPatt wrote:

The main Sky Q box is working fine although I had to reset it earlier because it wouldn't switch on from standby & the tv attached to the mini box said no signal. The mini box still shows no satelite signal even though I've followed all the troubleshooting procedures. The main box shows the mini box is attached & ready to use. Any ideas would be appreciated 


Hi @LindaPatt 

First try rebooting the main Q box and then when this is completely back up and running reboot the mini.
To reboot press Standby on your Sky Q remote (if the box responds to the remote), and then switch off and unplug at the mains.
Wait at least 30 secs and then Plug back in and switch your Sky Q box back on at the mains.
Wait for the on screen instructions to disappear and the front led to turn Amber. Then wait for 30 secs before you press Home on your Sky Q remote or if this is not working press the standby button on the front of the Q box (Amber led)

note: some features may take up to 5 minutes to return.

Reboot the mini as above.
If the mini still does not connect try a Network Reset on the mini.
Network Reset found in mini Home - Settings - Setup - Network.
Highlight Status and then select Reset on the right hand side. Follow instructions to WPS with main Q box.
You will be asked to press the WPS button on the main Q box (not the mini as the Network reset will start the mini WPS automatically).

If you are on Sky Broadband and the Router is nearer to the mini than the main box then you can try pressing WPS on the router instead of the main Q box.

Failing all of the above you may need a Sky Q WiFi Booster to position midway between your main Q box and the mini and you will need to contact Sky directly.

View this Answer within the discussion