These sort of problems are almost entirely down to dish alignment issues, even if it only seems like a single channel such as ITV is affected. Sky should be sending out an engineer to check the dish alignment.
Posted by a Superuser, not a Sky employee. Find out more
@Cer1 wrote: Just keeps saying satellite not working. But only on that one channel?
@Cer1 If you’re seeing a “no satellite signal” message check that the connections from the Sky dish going into the back of your Sky Q box are still finger tight. Otherwise it’s very likely a dish misalignment or possibly a failing LNB (on the arm of the dish) so check the troubleshooting on this link https://www.sky.com/help/articles/sky-tv-no-satellite-signal-sky-q It may then give you the opportunity to arrange an engineer to check the alignment of your dish. If it doesn’t you’ll need to contact Sky to book an engineer appointment.
If you are connected to a communal dish you need to liaise directly with your building management company / landlord who will have their approved engineers to contact.
It’s worth noting that:
▪️ a misalignment is not necessarily something that will be visible to the naked eye and could only affect one or two channels
▪️ a Sky Q box requires a periodic 'Keep alive' signal that is delivered via the satellite so if that isn’t received the box will close down until the satellite signal is restored.
▪️I AM NOT A SKY EMPLOYEE (undercover or otherwise)▪️ NOTE: I only provide help on the forum boards and NOT via Direct Messaging ▫️ Sky customer since 2001 with: Sky Q | Sky Superfast Broadband | Sky Talk | Sky Mobile
