TP Link axe75 settings to replace sky hub for 500mb FTTC connection

[Kully1972]

I have FTTC and am on sky 500 package and looking to replace the sky hub and connecting the AXE75 router directly to the openreach modem.

Anyone know the settings?

Thanks 

[Chrisee]

@Kully1972 not an ideal choice of router as TP-Link do not support Sky's normal authentication system DHCPv4 Option61 so you will need to try DHCPv6 PD which most but not all lines will support. 

Note you do not have FTTC which is partial fibre if you have an ONT you have full fibre FTTP.

[Kully1972]

Many thanks!

So I have FTTP!

I`ll try th TP link settings with a connection from the modem to the WLAN port and see how it goes

Should this fail I`m likely to get an Asus router with merlin software which dhould do the trick!

[Sayek]

May I ask what luck you had on this TP-Link router please.

[Kully1972]

I'm being connected to sky fibre next week on Friday.

I'll let you know how I get on!

The router has all the settings done so hoping I'm ok.

[Kully1972]

I thought I'd give an update.

TP LINK AXE75 connects fine!

However my speeds are alot slower approx 80 mb/s compared to 300 mb/s.

I might need to play with qos settings and switch it off.

[cookiemonsteruk]

@Kully1972 

Most asus rt ax routers don't require asus merlin to be flashed.

Certainly qos could be a culprit but so could ethernet cable and/or older ethernet adapter settings

What site are you using to measure the speed , are all ethernet cables at least cat 5e and what device are you using

[Chrisee]

@Kully1972 you are lucky that your line workswith hour router around 80% do 20% dont its down to who made the kit in the exchange.

[Sayek]

Appreciate your feeback @Kully1972 

May I ask if you setup the TP Link using IPv4 or IPv6 please.

[Kully1972]

Hi

I'm using DHCPv6 settings

I'm not sure there is a v4 option

[Chrisee]

@Kully1972 you will have both an IP4 and a IP6 connection as Sky provide both. It is the authentication of the connection that is being done using DHCPv6 PD. 

[Sayek]

Appreciate your reply.

May I ask what option you chose here.

Also how did you resolve the issue not getting the full speed? 

[Kully1972]

Many thanks Chrisee for correcting me.

I havnt had time to resolve the speed issue and have reverted to using the sky hub owing to being just too busy.

I may try attempting to hook up the TP link this eve and see if speeds stabilise and turn QOS off and see if it makes a difference.

Problem is I'm moving again in 2 months and will definitely be using the TP Link then.

[Kully1972]

Use dynamic bot pppoe

[Kully1972]

Hi Sayek

How did you get on?

I've finally ditched the sky router and have been happily using the tp link.

The speeds are ok but I think I have a driver issue for my intel WiFi card on PC.

WiFi 6E is running but not even being detected on PC.

The tp link is less prone to drop outs and no longer gets buffering on my TV.

I'm glad in the end to have bought the TP Link in the end!