0

Discussion topic: Fullfibre 300 issues

Reply
This message was authored by: Sky420

Fullfibre 300 issues

Hello,

 

I am have changed my contract from Full Max to Sky FullFibre 300 and since the I am having a speed of 91 mbps ...and Sky gives a guarentee of min 200mbps which I am yet to see and I have been charged a full amount. Even after logging tickets on this issues it gets closed citing that Sky is aware, so why I have been charged for a service. I suspect the issue is that I have been provided with a standard Hub and not a Wifi Max Hub. Has anyone faced these issues . I have since reset the Hub and have done all that was advised me to do but still the issue remains.

Reply

All Replies

This message was authored by: Chrisee

Re: Fullfibre 300 issues

Posted by a Superuser, not a Sky employee. Find out more

@Sky420 first thing you try is to replace the ethernet cable connecting your hub to the ONT as a faulty cable will reduce speed to 100Mb/s which is condistent with your speed test after allowing for overgeads.

=========================================================
65inch Sky Glass, 3 Sky Streaming Pucks, Sky Ultrafast + and Sky SR213(white Wifi Max hub) main Wifi from 3 TP-Link Deco M4 units in access point mode
This message was authored by: JimM1

Re: Fullfibre 300 issues

@Sky420 Ran a sky Broadband Hub on the sky FF500 connection with the full 500Mb/s wireless and wired speed's with occasional slow downs when Network was busy, you do not say if either gets you above the 90Mb/s you are quoting, but that is the limit for a 100Mb/s connection, if both wireless/wired then Cable from Port 4 wan to the ONT best place to start, one bad pin cable connection and 100Mb/s is the limit!

If the back off the hub Ethernet connections has lights, then LHS one as you look, Orange 100Mb/s, Green 1Gb/s connected!

Reply