Draytek 2765 modem/router as replacement for Sky ER115

[matt-westover]

@No2ID Please could you send me a link to your guide. I have sent you a PM. 

[J-S]

@No2ID 

Thank you.

[Danieltucker001]

Would be great if @No2ID or anyone else who has the link / guide could send it to me please. Thank you. 

[matt-westover]

@No2IDPlease could you email me the link too? Thanks in advance. 

[nomoreER115]

@No2IDI'd be very grateful if you could send me your instructions.

Thank you.

[No2ID]

@matt-westover @Danieltucker001 

I have sent you the link to the document.  Please like if of use to you

[No2ID]

@nomoreER115 

I have sent you the link.  Please like if of use to you

[Brugie58]

Set up for Draytek 2860/2865

If you set up as attached it should just work without any problems 

Note if your on the Gigabit FTTP,  you really need the 2865

You must connect your ONT to the WAN port on the router 

Click on WAN2 for this page 

This one should already be setup assuming your coming from FTTC

Thats it - Ready to go

Just just need to set up your wireless etc now 

[Brugie58]

And I forgot to mention you need to turn on hardware acceleration 

[Karlito1501]

Great post. Looks like you've helped loads of people. 
I too would like a copy of your guide. 
t

Thanks in Advanced. 
karlito

[mogwai68]

Hi @No2ID , appreciate it's been a while since you made this post but I wondered if you would still be able to share your guide on this. I've just set up a Draytek 2865 router and have got it working, but more by guess work than design. Also not sure I've configured it optimally (Ping latency is now worse) so perhaps there are some settings I should tweak. 

Thanks

[DesiMum]

Hi @No2ID

Please could you send me the instructions? I have a draytek router and having issues with the same thing. Would really appreciate it. 

[Brugie58]

@DesiMum 

You should be able to get it to work, using my settings as above on this page 

[DesiMum]

I'll try them. Thank you so much. Have a draytek 2866 and a ubiquiti mesh with a now tv SKY router. Wish me luck!

[Brugie58]

@DesiMum 

Just a point, make sure you upgrade the firmware on your router to 4.4.2

Although there is nothing mentioned specifically in this firmware update, it increased my speed from 600 to 950

I was baffled for a while as to why I could not get more than 600, while everything was connecting at Gigabite speeds on the network.

It was only by chance I discovered this update and solved the problem