Disable map-t profile

[Xox_ellz_xox]

Hey,

I would like to disable MAP-T/CGNAT on my sky max hub (white box) so that I can port forward properly so people can join my gaming servers such as satisfactory Minecraft etc.

please can someone help me on this.

[Chrisee]

@Xox_ellz_xox you should not need MAP-T removed as setting a port forwarding rule switches the share to 1:1

A similar result if you enable UPnP which is usually sufficent. See UPnP set up

[Xox_ellz_xox]

I have set up port forwarding but others outside of my local network can't connect says encryption token missing

[JimM1]

@Xox_ellz_xox Did you also turn on the uPnP for the sky Max hub?

[Xox_ellz_xox]

How do I do that is that in the local IP with the IPv6?

[JimM1]

@Xox_ellz_xox See the post 2 link that was given to you for the MAP-T 1:1 ratio.

[Xox_ellz_xox]

it is now enabled willl get a couple friends to test to see if they can connect and will reply with either success or failure I hope for success

[Xox_ellz_xox]

So I have had a friend try to join but it just times out I can join on my local network but anything outside of that don't want to connect and times out 

[JimM1]

@Xox_ellz_xox Post a capture off your port forwarding rules, what sky hub were you using before this all started to go wrong!

Also run the www.whatismyipaddress.com to see that you are indeed assigned both ip's if they are in or not in the MAP-T range!

[Xox_ellz_xox]

How do I add Screenshots 

My router is the Sky Max Hub (white box) 

My port forwarding is set to UDP 15000 15777 and 7777 for satisfactory 

My public IP is 

IPv6: 2a06:5904:35c1:8c00::a6e6

IPv4: 151.231.49.140

any other info you need? 

[Xox_ellz_xox]

so attached is the port forwarding rules I have set for a Minecraft server and satisfactory both run on my local network but not anyone outside of it 

[Removed]

the hub I have is the sky max hub (white box) 

if you need any more info please let me know 

 

Moderator notes: Removed personal info

[JimM1]

@Xox_ellz_xox Ip's look fine and reachable no problems, you must have a PF issue, again what sky Hub did you have BEFORE this Max?

[Xox_ellz_xox]

Ah before the max I believe we had the older black box with fiber on it. Think

it was 68mb down? If that helps at all was a

while ago that we changed 

[JimM1]

@Xox_ellz_xox Is this all something new then that you are just trying to do, or was it all working fine before etc?

[Xox_ellz_xox]

All new it wasn't set up on my previous hub as got in to more games with my friends and we wanted servers to play when others aren't on so I built a server pc to run servers for games on instead of paying for them as it was getting quite costly each month