@Tt32 wrote:
After our electricity was turned off for work being done we gave list our broadband connection to the tv. We have sky a Abdul sky broadband. We gave tried connection using the password but it keeps saying the password is wrong. We gave checked and double checked, all upper and lower case correct. Advice?
Hi @Tt32
First reset your broadband router.
If on Sky broadband hold the Reset on the back of the router until the power light flashes green (about 10 seconds). Don't unplug or switch off your router while it resets. The power light will go green when it's done.
If on 3rd party broadband and your router does not have a reset button, reboot it by disconnecting the power lead for 30 secs and then reconnecting.
Wait until the router is completely back and running and then try a Network Reset found in Q box Home - Settings - Setup - Network.
Highlight Status and then select Reset on the right hand side. Follow instructions to connect by WiFi to your router. Even if reset is not listed there is still an option to connect by WiFi to Sky or 3rd party router.
If you are on Sky Broadband you will be asked to press the WPS button on the Sky router. (Not on the Q box as the Network reset will start the main Q box WPS automatically). Make sure you press the WPS button on the Sky router and not the reset button.
If you are on Sky fibre Broadband with the new white Sky Max router, then you need into connect it as if it is a 3rd party router.
If you are on 3rd party (non Sky or Sky Max router) broadband then you need to enter the SSID and password for the router 2.4 Ghz WiFi band.
