Router 12v

[billynomates37]

Hello.

Im having my broadband installed tomorrow.  The router cable will not be long enough to reach the power source.

Have seen extensions on Amazon. Anyone out there know what the male/female size is need.

It's the black router.

Ta

[JimM1]

@billynomates37 What are you having installed tomorrow that requires the change to the power source length for the low voltage cable.

You would be quicker to run a single socket mains extension than try to find a barrel adapter cable of BOTH correct sizes to fit, but looks like it is a 4mm x 1.7mm but do not hold me to that fact....

[billynomates37]

Hi

The router sits on a corner shelf above a power socket.  I'm short by a few inches(story of my life).

Its either an extension lead or move the shelf down which will be added faff.

The supplied ethernet cable is also too short but I have a longer one I can use.

[JimM1]

@billynomates37 As i say do not hold me to the sizes but have a look, try and measure the plug for yourself....

4.0mm x 1.7mm Female to 4.0mmx1.7mm Male DC Power Plug Extension Cable DC Power Adapter Cord 5ft 1.5...

[billynomates37]

I've tried to measure but 2.1 and 2.5 look very close.

Will order one of each i can always return them.

Thanks for your help 

[JimM1]

@billynomates37 Never even thought to ask, but i was looking at the adapter on the SR203 hub, just so you know. My bad....

Once you know the correct do post it up will take away any future guessing. 

[billynomates37]

Will do 

[Deb3000]

Old techy's tip.  You can use metric drill bits as a gauge.  If a 3.0 doesn't fit try a 2.5, if that doesn't fit it will be a 2.1.  Simples!

[billynomates37]

Excellent tip.👍