ASUS DSL-AX82U with Ultra Fast 1

[Lootington]

I was wondering if anyone could explain the settings for configuring the DSL-AX82U, I have Ultra Fast 1 provided by openreach (Socket 5C ) into the property. I have tried using the Automatic DSL configuration but it does not seem to detect anything. I have also tried configuring manually from what I could find on the forums but could not get the modem to successfully connect. If someone could look at the settings I have attached and tell me where I'm going wrong it would be greatly appreciated.

[Chrisee]

@Lootington as far as I am aware the Asus DSL-AxX82U does not havea G.Fast modem so cannot be used on an Ultrafast1 service over copper. You would need to source a G.Fast modem or use your Asus behind the Sky Broadband Hub SR204 in a double NAT config.

[Lootington]

@Chrisee Would a Draytek Vigor 166 be compatible?

[cookiemonsteruk · Accepted solution]

@Lootington 

Yes

[cookiemonsteruk]

@Lootington 

Are you in the uk!

[Lootington]

@cookiemonsteruk Yes I am

[cookiemonsteruk]

@Lootington 

You would need to change connection type from ppp to auto ip this should bring up the client identifier (option 61) field where you enter 

anything@skydsl|anything

Also if you don't enable vlan id/vid on your draytek at 101 then on the asus goto lan settings->iptv set vlan id/vid as a manual setting in internet at 101

[Lootington]

@cookiemonsteruk Thank you so much for the guidance, really appreciate it.