Problem with tv connections from sky + box

[renz]

I keep getting a blue screen saying this display does not support HDCP

on the tvs that are connected by the RF out on my sky box 

[Mark39]

Try turning off 'HDMI Control over RF' if it's currently turned on. I think the setting is in the, Picture menu.

[renz]

In the picture settings there is a hdmi control that is off 

hdmi resolution output is set to 1080i 

rf1 and 2 picture formats are set to 16.9 

[Annie+UK]

---

@renz wrote:

In the picture settings there is a hdmi control that is off 

hdmi resolution output is set to 1080i 

rf1 and 2 picture formats are set to 16.9 

---

There should be an option specifically mentioning RF

Does your main tv connect via HDMI?

[renz]

Defiantly not one mentioning rf

 

[Annie+UK]

Is there a page 2, try pressing Channel+ on that page

The option might appear when HDMI control is on, it has been a while since I used them pages

[renz]

Yes main tv is connected via hdmi 

[Annie+UK]

Turn ON HDMI Control

You may need to trun off the TV and Sky box at the mains, then turn on the Sky box and wait 5 minutes then turn on the main TV to allow the HDMI handshaking to be completed

[renz]

Found it now and turned it off will try it because it doesn't do it instantly 

[renz]

Tried all the suggestions and it's still doing it