0

Discussion topic: Changed to Fibre

Reply
This message was authored by: BandJoe

Changed to Fibre

Changed supply & now network keeps dropping out.

 

on mini box can't change to new WiFi?

Reply

All Replies

This message was authored by: oldfella

Re: Changed to Fibre

Posted by a Superuser, not a Sky employee. Find out more

@BandJoe wrote:

Changed supply & now network keeps dropping out.

on mini box can't change to new WiFi?


hi @BandJoe 
Unless you are on Sky Broadband mini connects to main Q box and not your Network.

First connect your main Q box to your new router.

First reset your broadband router.
If on Sky broadband hold the Reset on the back of the router until the power light flashes green (about 10 seconds). Don't unplug or switch off your router while it resets. The power light will go green when it's done.
If on 3rd party broadband and your router does not have a reset button, reboot it by disconnecting the power lead for 30 secs and then reconnecting.
Wait until the router is completely back and running and then try a Network Reset found in Q box Home - Settings - Setup - Network.
Highlight Status and then select Reset on the right hand side. Follow instructions to connect by WiFi to your router. Even if reset is not listed there is still an option to connect by WiFi to Sky or 3rd party router
If you are on Sky Broadband you will be asked to press the WPS button on the Sky router. (Not on the Q box as the Network reset will start the main Q box WPS automatically). Make sure you press the WPS button on the Sky router and not the reset button.
if you are on 3rd party (non Sky ) broadband then you need to enter the SSID and password for the router 2.4 Ghz WiFi band.

Once you get your Main Q box connected try Network Reset on the mini.

Network Reset found in mini Home - Settings - Setup - Network.
Highlight Status and then select Reset on the right hand side. Follow instructions to WPS with main Q box.
You will be asked to press the WPS button on the main Q box (not the mini as the Network reset will start the mini WPS automatically).

If you are on Sky Broadband and the Router is nearer to the mini than the main box then you can try pressing WPS on the router instead of the main Q box. If you do this make sure you press the Sky router WPS button and not the router reset button.

Failing all of the above you may need a Sky Q WiFi Booster to position midway between your main Q box and the mini and you will need to contact Sky directly.

 

Reply