15 Mar 2023 08:46 PM
In 2011 in our block of flats the management company installed a communal satellite dish and connected at least two cables from the dish to each flat. In each flat there was at least one double dual connector wall face plate (some flats chose to have more than one wall box).
To get a Sky Box (or a Freesat box) to work then, you simply plugged in the boxes 2 cables to that wall box.
Does the same set up work with Sky Q or are there some special requirements?
Notes
- I do appreciate Sky Q also needs a broaband connection.
15 Mar 2023 09:01 PM - last edited: 15 Mar 2023 09:03 PM
Posted by a Superuser, not a Sky employee. Find out more
@BentleyBoy183 wrote:
In 2011 in our block of flats the management company installed a communal satellite dish and connected at least two cables from the dish to each flat. In each flat there was at least one double dual connector wall face plate (some flats chose to have more than one wall box).
To get a Sky Box (or a Freesat box) to work then, you simply plugged in the boxes 2 cables to that wall box.
Does the same set up work with Sky Q or are there some special requirements?
Notes
- I do appreciate Sky Q also needs a broaband connection.
There needs to be a special adapter inserted in the distribution system to convert the legacy signals into an SCR signal suitable for SKY Q (whch uses a single cable - the SC in SCR - in thiis mode).
The existing signals must be good enough as well (SKY Q needs a slightly better Signal than Freesat SKY HD can cope with)
You would need permission for the enginners to access the system and install the adapter
15 Mar 2023 08:49 PM
Posted by a Superuser, not a Sky employee. Find out moreSome of the components need changing but yes still possible.
15 Mar 2023 09:01 PM - last edited: 15 Mar 2023 09:03 PM
Posted by a Superuser, not a Sky employee. Find out more
@BentleyBoy183 wrote:
In 2011 in our block of flats the management company installed a communal satellite dish and connected at least two cables from the dish to each flat. In each flat there was at least one double dual connector wall face plate (some flats chose to have more than one wall box).
To get a Sky Box (or a Freesat box) to work then, you simply plugged in the boxes 2 cables to that wall box.
Does the same set up work with Sky Q or are there some special requirements?
Notes
- I do appreciate Sky Q also needs a broaband connection.
There needs to be a special adapter inserted in the distribution system to convert the legacy signals into an SCR signal suitable for SKY Q (whch uses a single cable - the SC in SCR - in thiis mode).
The existing signals must be good enough as well (SKY Q needs a slightly better Signal than Freesat SKY HD can cope with)
You would need permission for the enginners to access the system and install the adapter
16 Mar 2023 07:16 AM
Thank you for your responses @nigea99 and @Chodley
I've confirmed a resident in the block has Sky Q via the communal dish. The Sky engineer said only one cable is was needed from the wall box to the Q dish, and the service is working fine.
So it looks as if the special adapter inserted in the distribution system to convert the legacy signals into an SCR signal suitable for SKY Q might have already been put in pace.
Hopefully the flat getting Sky Q will have a trouble free installation.
16 Mar 2023 07:23 AM - last edited: 16 Mar 2023 07:24 AM
Posted by a Superuser, not a Sky employee. Find out more
@BentleyBoy183 wrote:
Thank you for your responses @nigea99 and @Chodley
I've confirmed a resident in the block has Sky Q via the communal dish. The Sky engineer said only one cable is was needed from the wall box to the Q dish, and the service is working fine.
So it looks as if the special adapter inserted in the distribution system to convert the legacy signals into an SCR signal suitable for SKY Q might have already been put in pace.
Hopefully the flat getting Sky Q will have a trouble free installation.
hopefully the system is totally suitable for SKY Q.
I should, however, advise there are two ways it can be done.
One is the system itself has been set up to supply the SCR feed to everyone, when given the correct signals from the box
The other is that smaller adapters added (usually by SKY) which only feed a few (or possibly only 2) apartments & may need additional ones as more residents get SKy Q
Hopefully you have the former setup which just means plug inm set to SCR and it will work
07 May 2024 12:13 PM
We have a communal dish and new Sky Q terminals installed across 6 Blocks for 38 Flats. There are 3 flats with existing sky dishes, how do they go about getting the individual dishes removed and connect off the communal sky terminals please? Would Sky do this or a TV aerial engineer? Thanks 🙂
07 May 2024 01:21 PM
Posted by a Superuser, not a Sky employee. Find out more
Sky doesn't remove dishes at all, and I suspect they wouldn't visit to convert individual to communal connections as that's not actually a fault.
No problem. Browse or search to find help, or start a new discussion on Community.
On average, new discussions are replied to by our users within 90 minutes
New Discussion