I would like to book a visit from an engineer

[Marg82]

I cannot reconnect two sky Q boxes after changing our broadband provider 

[oldfella]

---

@Marg82 wrote:

I cannot reconnect two sky Q boxes after changing our broadband provider 

---

Hi @Marg82 

Afraid you are not contacting Sky directly here as this is a customer forum.
If you need to contact them you need to persevere by phone.
To contact Sky
Select Need more help
at the bottom of the following link and this will lead to a phone contact.

https://www.sky.com/help/home

Regarding you issue

First reset your broadband router.
If on Sky broadband hold the Reset on the back of the router until the power light flashes green (about 10 seconds). Don't unplug or switch off your router while it resets. The power light will go green when it's done.
If on 3rd party broadband and your router does not have a reset button, reboot it by disconnecting the power lead for 30 secs and then reconnecting.
Wait until the router is completely back and running and then try a Network Reset found in main Q box Home - Settings - Setup - Network.
Highlight Status and then select Reset on the right hand side. Follow instructions to connect by WiFi to your router. Even if reset is not listed there is still an option to connect by WiFi to Sky or 3rd party router
If you are on Sky Broadband you will be asked to press the WPS button on the Sky router. (Not on the Q box as the Network reset will start the main Q box WPS automatically). Make sure you press the WPS button on the Sky router and not the reset button.
if you are on 3rd party (non Sky ) broadband then you need to enter the SSID and password for the router 2.4 Ghz WiFi band.

See if this gets the main Q box running.

[Aileen8]

Hi my skyQ box is not working . I was watching one night last week and all of a sudden it stopped (froze)and went fuzzy . It is still not working

[oldfella]

---

@Aileen8 wrote:
Hi my skyQ box is not working . I was watching one night last week and all of a sudden it stopped (froze)and went fuzzy . It is still not working

---

Try rebooting your Q box @Aileen8 

To reboot press Standby on your Sky Q remote (if the box responds to the remote), and then switch off and unplug at the mains.
Wait at least 30 secs and then Plug back in and switch your Sky Q box back on at the mains.
Wait for the on screen instructions to disappear and the front led to turn Amber. Then wait for 30 secs before you press Home on your Sky Q remote or if this is not working press the standby button on the front of the Q box (Amber led)

note: some features may take up to 5 minutes to return.