Glass gen 2

[ARCHIE3275]

Sky glass usb ports absolute nightmare to use due to were they are situated i have glass on wall (65 inch) is gen 2 easier to accsess or are they in same place as original glass used wall bracket and spacers that came with tv only the thickness of a pound coin space from wall to back of tv 

[peter-marlow+1966]

Yes all port are in the same place as the gen 1 

[peter-marlow+1966]

With an extra  usb port to

[ARCHIE3275]

Thanks for that quick reply . Not much thought went into wall mounted sky glass in my opinion for usb access. . Maybe need some more spacers if i do decide to go for gen 2  Whats everone elses thoughts on this ?? 

[peter-marlow+1966]

You can order a wall mount  from sky for the gen 2 it's  not the same stand as the gen1

[TimmyBGood]

@ARCHIE3275 

USB on Glass is only intended for the Sky Live camera.  Perhaps you mean the HDMI ports?

One option might be to add short HDMI extension cables before wall mounting.

[peter-marlow+1966]

Sky glass gen 2 as a normal  usb port add to it as  i have the camera  connected and lights around  the back of the tv  now

[ARCHIE3275]

Hdmi i meant sorry for that

[peter-marlow+1966]

Only 3 hdmi ports as the gen 1, you can order a wall mount  bracket  when you order  a tv it is £100 extra  or you could buy a tv bracket  from any retailer as i  said  before  the stand  on the gen 2 tv is different  to the gen 1, the stand on the gen 2 to is just  that, you assemble the gen 2 yourself  watch  the video  on YouTube  about  this there are no screws no upright  bar at the back of the gen 2 tv and no backplate or even a wall  mounting  template  that comes with  the gen 2 tv, the stand was redesign to do it yourself  

[ARCHIE3275]

Hi sorry for the confusion .. i did mean the hdmi sockets on glass gen 1 been very tight to get to 

•  Wall bracket /stand came with gen 1 and our 65" has been on wall since purchase few yr ago . The wall bracket was fitted with spacers provided at the time  only leaving a very small space between tv and wall knowing what i know now i would of purchased more spacers to make accesbillity to hdmi sockets a lot easier i will look to purchasing a hdmi extension so this can be left in tv at all times my other question was if i upgrade to gen 2 would the tv wall bracket be fine to just replace tvs and not bother purchasing new bracket ( gen 1 wall bracket is solid on wall and would take some removing without taking half the wall away haha ) thank you 

[TimmyBGood]

@ARCHIE3275 

The Gen 1 wall plate is specific to the Gen 1 Glass set: a Gen 2 Glass (or a Glass Air) will not fit it at all.