Port forwarding not working on Sky Max Hub

[robbtong]

Hi

I have just signed up to Sky and have received the Max Hub. When I'm trying to configure port forwarding to my Home Assistant box, the port forward does not work.

Called Sky and spoke to someone who said change the Wifi to WPA2 as they had seen this issue with VPN setups and this had fixed it. On checking mine, it was already set to WPA2.

The Home Assistant box is connected directly to the Hub Max via an ethernet cable. To troubleshoot, I removed the Sky Hub Max and replaced it with my own router that runs OpenWRT which conencted directly to the Sky ONT with DHCP Option 61 configured to make it work. 

Set the port forward on that box and it goes straight into the Home Assistant dashboard externally. Switched back to Sky Hub and nothing.

The person on the phone said he had no idea if the WPA2 change didn't fix things, so hoping someone on the forums can help. What I found strange as well is that if you try and change the name of a device on the Sky App, it says that an error has occured no matter how many times I've tried. That strikes me as a communication issue to the hub in sending it's settings over.

Thanks in advance.

[JimM1]

@robbtong Link for changes on the sky Max.

Sky Max change settings link.
https://www.sky.com/help/articles/change-wifi-max-hub-settings-a

[robbtong]

Hi

I've applied the settings as per that page but the hub doesn't seem to be paying any attention. 

[robbtong]

Funny enough it seems to work if you set the DMZ IP to the box I want to forward to, but thats not ideal as it opens up every port to be forwarded.

[JimM1]

@robbtong You mat have to get sky to fix out the MAP-T for the sky max, see the pinned post at the top of the page!

[-rpnz-]

Hi @robbtong 

By default the Sky Max Hub shares an IPv4 address using MAP-T; normally this would prevent port forwarding as you don't have exclusive use of all ports, but the Sky Max Hub should detect whenever you add a port forward, and do what we call "opt-out" of IPv4 address sharing, giving you an entire IPv4 address to use yourself.   It's possible this automated process has not worked.

In the Sky Max Hub's web interface, on the left navigate to "Connection" and then "Sky Network" and then look for two fields:

• WAN IP Address (IPv4)
• MAP-T Sharing Ratio

If the WAN IPv4 Address field simply has an IPv4 address--nothing in parantheses--then you're on Dual-Stack and port forwarding should be working.

If the IPv4 address is followed by "(Shared with MAP-T)" then you're connected using MAP-T rather than native Dual-Stack.  That in itself is not a problem, the important thing to check out is the MAP-T Sharing Ratio down the bottom. 

If the sharing ratio set to "1:1" then you have been opted out correctly and port forwarding should be working correctly. 

If the sharing ratio is anything else (8:1 in the UK), even after enabling Port Forwarding/DMZ/etc. then the automated opt-out process may not have worked correctly.   In theory this should resolve itself after 12hrs, but if it doesn't, feel free to direct message me and I'll sort it out for you.