3

Discussion topic: Connecting smart lamp.

Reply
This message was authored by Galriad61 This message was authored by: Galriad61

Connecting smart lamp.

Trying to connect smart lamp but it says the router does not accept  UBD and refuses to pair.

 

Also my qbox and second box are wired but defaults to Wi-Fi. How can I force them to use the wired connections?


Best Answers
This message was authored by TimmyBGood This message was authored by: TimmyBGood Answer

Re: Connecting smart lamp.

Posted by a Superuser, not a Sky employee. Find out more

@Galriad61 

 

As posted by @jamesn123

 

Note that this process does not apply to the new (white) Max Hub

 

So to split the two channels you need to go to your router config page which can be found by typing 192.168.0.1 into your web browser.

 

To access the page, you'll need;

 

username: admin

 

password: sky OR your WiFi password

 

- Select wireless from the navigation bar and scroll down a little and untick the 'Synchronise 2.4GHz and 5GHz settings'

- Scroll to the bottom of the page and hit apply.

- Once the page reloads you need to go to the 5GHz wireless settings page on the sub navigation bar below where you click wireless before

- In the 5GHz section you want to go to the box called 'Name (SSID)' and add something like 5g to the end of the current name

- Scroll down and hit apply

- Then on any wireless device you should now see two networks. One network will be the same name as usual and will be 2.4GHz band and the other will be the usual name with 5G on the end (Or whatever you typed). Connect any 5GHz capable device to the 5GHz network and see if it works correctly. The WiFi password should be the same if you havent changed it.

* * * * * * *

Sky Glass 55" (on ethernet) & two Stream Pucks (one ethernet / one WiFi)
BT Halo 3+ Ultrafast FTTP (500Mbs), BT Smart Hub 2

View this Answer within the discussion

Reply

All Replies

This message was authored by TimmyBGood This message was authored by: TimmyBGood

Re: Connecting smart lamp.

Posted by a Superuser, not a Sky employee. Find out more

@Galriad61 wrote:

Trying to connect smart lamp but it says the router does not accept  UBD and refuses to pair.

 

UDP?  What colour is your Sky Hub?

 

Also my qbox and second box are wired but defaults to Wi-Fi. How can

I force them to use the wired connections?

 

You'd need to switch off the Q WiFi (which does mean the boxes cannot act as wireless hotspots)

 

1) Press the ‘Home’ button on your remote control.
2) Scroll down to highlight ‘Settings’ but DO NOTpress select.
3) Press ‘001’.
4) Press ‘Select’

Then: Network -

- 2.4Ghz wireless - Off

- 5Ghz wireless - Off


 

* * * * * * *

Sky Glass 55" (on ethernet) & two Stream Pucks (one ethernet / one WiFi)
BT Halo 3+ Ultrafast FTTP (500Mbs), BT Smart Hub 2
Galriad61
Topic Author
This message was authored by Galriad61 This message was authored by: Galriad61

Re: Connecting smart lamp.

@TimmyBGood it's black. Thanks

This message was authored by TimmyBGood This message was authored by: TimmyBGood Answer

Re: Connecting smart lamp.

Posted by a Superuser, not a Sky employee. Find out more

@Galriad61 

 

As posted by @jamesn123

 

Note that this process does not apply to the new (white) Max Hub

 

So to split the two channels you need to go to your router config page which can be found by typing 192.168.0.1 into your web browser.

 

To access the page, you'll need;

 

username: admin

 

password: sky OR your WiFi password

 

- Select wireless from the navigation bar and scroll down a little and untick the 'Synchronise 2.4GHz and 5GHz settings'

- Scroll to the bottom of the page and hit apply.

- Once the page reloads you need to go to the 5GHz wireless settings page on the sub navigation bar below where you click wireless before

- In the 5GHz section you want to go to the box called 'Name (SSID)' and add something like 5g to the end of the current name

- Scroll down and hit apply

- Then on any wireless device you should now see two networks. One network will be the same name as usual and will be 2.4GHz band and the other will be the usual name with 5G on the end (Or whatever you typed). Connect any 5GHz capable device to the 5GHz network and see if it works correctly. The WiFi password should be the same if you havent changed it.

* * * * * * *

Sky Glass 55" (on ethernet) & two Stream Pucks (one ethernet / one WiFi)
BT Halo 3+ Ultrafast FTTP (500Mbs), BT Smart Hub 2
Reply

Was this discussion not helpful?

No problem. Browse or search to find help, or start a new discussion on Community.

Start a new discussion

On average, new discussions are replied to by our users within 4 hours

New Discussion