Sky ultrafast sr203 replacement

[Skull+Treaty]

Edit to the above, FTTP the VLAN should be set to 0 or -1, not 101 as I mentioned above. 101 is for VDSL

[tcp2015]

@Skull+Treaty 

vlan is 1-4094, can't add -1 or 0.  Tried 101 and can't connect. 

Do I need to use wire shark to get my username and password?

[tcp2015]

@Skull+Treaty  @mae-3  @cookiemonsteruk 

current settings, get a connected response but no connection to isp/internet. It's showing MAC address, up address and default gateway but no DNS. 

 

[cookiemonsteruk]

@tcp2015 

Vlan needs to be unmarked  so don't enable it. Re authentication in dhcp v6 pd keep in wireless router mode

Select the WAN interface section of router GUI, then select dual-stack option WAN interface for IPv4 & IPv6, for the address select DHCPv6 (dynamic option not static), enable prefix delegation (PD) on WAN and then select SLACC for IPv6 creation method on LAN interface is how I see it in the manual.

[tcp2015]

Perfect, I am on, thanks so much for your help all, very much appreciated. 

[cookiemonsteruk]

@tcp2015 

Excellent, was it the dhcp v6 prefix delegation ? Respect to @mae-3 for that info from a different post that i saved onto templates.  @Skull+Treaty first successful dhcpv6 pd authentication for me .😁👌👍

[Skull+Treaty]

@cookiemonsteruk BOOM 😎