No signal

DB710 — Wed, 14 Oct 2026 18:40:21 GMT

The no signal is on the tv but it will not let me press home to go to settings

it's sky q and first time I've had issues

Re: No signal

Daniel0210 — Wed, 14 Oct 2026 18:49:58 GMT

@DB710
If you are new to the forum, or this is your first post, then welcome to the Community which is predominantly made up of Sky customers helping other Sky customers. You aren’t talking to Sky by posting here.

No signal or no satellite signal?

”No signal” messages tend to be generated from your TV and normally means your TV’s not seeing the Sky box on the relevant HDMI input.

If you are seeing any kind of ”No satellite signal” related message, check that the connections from the Sky dish going into the back of your Sky Q box are still finger tight. Otherwise it’s very likely either;
▫️a dish misalignment,
▫️a failing LNB (on the arm of the dish),
▫️water getting into the cabling,
▫️it is currently raining very heavily (in which case see if it returns to normal when it eases).

So check the troubleshooting on this link
https://www.sky.com/help/articles/sky-tv-no-satellite-signal-sky-q
It may then give you the opportunity to arrange an engineer. If it doesn’t you’ll need to contact Sky to book an engineer appointment.

If you are connected to a communal dish you need to liaise directly with your building management company or landlord who will have their approved engineers to contact direct.

Additionally:

🔹 a misalignment is not necessarily something that will be visible to the naked eye and could only affect one or two channels (amongst the first to be affected may be GB News and CNN),

🔹 a Sky Q box requires a periodic 'Keep alive' signal that is delivered via the satellite so if that isn’t received the box will close down until the satellite signal is restored.

topic No signal in Sky Q

No signal

Re: No signal