Tv sgnal

Draper — Sat, 28 Mar 2026 09:30:22 GMT

Television is saying no signal on screen q bx is on red tried turning off but still does not work

Re: Tv sgnal

GD1 — Sat, 28 Mar 2026 09:34:16 GMT

@Draper "No Signal" or "No Satellite Signal"? These are 2 different messages.

One is your TV not seeing the input your Sky Q is assigned to on the TV the other is a cable/dish issue.

Re: Tv sgnal

Daniel0210 — Sat, 28 Mar 2026 10:31:41 GMT

@Draper
”No signal” messages tend to be generated from your TV and normally means your TV’s not seeing the Sky box on the relevant HDMI input.

If you see a “no satellite signal” error message, check that the connections from the Sky dish going into the back of your Sky Q box are still finger tight. Otherwise it’s very likely either;
▫️a dish misalignment,
▫️a failing LNB (on the arm of the dish),
▫️water getting into the cabling,
▫️very heavy rain or
▫️snow on the dish/LNB
so check the troubleshooting on this link
https://www.sky.com/help/articles/sky-tv-no-satellite-signal-sky-q
It may then give you the opportunity to arrange an engineer. If it doesn’t you’ll need to contact Sky to book an engineer appointment.

If you are connected to a communal dish you need to liaise directly with your building management company or landlord who will have their approved engineers to contact direct.

It’s worth mentioning that:

🔹 a misalignment is not necessarily something that will be visible to the naked eye and could only affect one or two channels (amongst the first to be affected may be TNT or GB News),

🔹 adverse weather can affect the satellite signal and following such events wait times for an engineer will probably be significantly longer.

🔹a Sky Q box requires a periodic 'Keep alive' signal that is delivered via the satellite so if that isn’t received the box will close down until the satellite signal is restored.

topic Re: Tv sgnal in Sky Q

Tv sgnal

Re: Tv sgnal

Re: Tv sgnal