No. Sig

SHANTI+LAL+CHAWLA — Thu, 03 Apr 2025 09:05:13 GMT

No satellite signal

Re: No. Sig

SHANTI+LAL+CHAWLA — Thu, 03 Apr 2025 09:09:33 GMT

I have tried all the ways but not successful, I need an engineer visit

Re: No. Sig

Daniel0210 — Thu, 03 Apr 2025 10:06:54 GMT

@SHANTI+LAL+CHAWLA
No signal and no satellite signal are different .

A message displaying ”no signal” tends to be generated from your TV and normally means your TV’s not seeing the Sky box on the relevant HDMI input.

If you’re seeing a “no satellite signal” message check that the connections from the Sky dish going into the back of your Sky Q box are still finger tight. Otherwise it’s very likely a dish misalignment or possibly a failing LNB (on the arm of the dish) so check the troubleshooting on this link
https://www.sky.com/help/articles/sky-tv-no-satellite-signal-sky-q
It may then give you the opportunity to arrange an engineer to check the alignment of your dish. If it doesn’t you’ll need to contact Sky to book an engineer appointment.

If you are connected to a communal dish you need to liaise directly with your building management company / landlord who will have their approved engineers to contact.

It’s worth noting that:

▪️ a misalignment is not necessarily something that will be visible to the naked eye and could only affect one or two channels

▪️ a Sky Q box requires a periodic 'Keep alive' signal that is delivered via the satellite so if that isn’t received the box will close down until the satellite signal is restored.

topic Re: No. Sig in Sky Q

No. Sig

Re: No. Sig

Re: No. Sig