The content on this page may be out-of-date or have been superseded by newer information. Links on this page to other sites may not work and contact information may be inaccurate. This page has been archived for future reference.
25-06-2013 12:54 PM
25-06-2013 04:49 PM
I have just been informed by Sky, that they do not support the Kindle or S3's. You will need to contact Samsung for the settings. Load of tosh I believe. Mine worked fine, prior to migration 4 weeks ago.
25-06-2013 09:00 PM
Just off the phone to Sky customer services regarding the above problem.
They were very polite but not very helpful in resolving the problem,was told to contact Samsung as they do not support these devices!
When I asked them to supply me with my Sky broadband username and password so I could put them in my Netgear router and do away with the sky hub, they said that they do not hold that information!
So if they don't hold them, who does? Load of rubbish.
I have never been provided with them as the sky hub came pre-programmed all i had to do was plug it into the phone line, no set up required.
Having read other articles online sky only want you to use there hub not your own one.
Does anyone know how I can set up my netgear router on my sky broadband ? Or how to obtain the info required from the sky hub router???
Wish I'd stuck with my old ISP.
26-06-2013 03:38 PM
Thanks for posting.
I have a an S3 and can assure you that it connects to my Sky Hub without any issues, I haven't been told that there was a known problem with this so I'm very confused right now. The reason Sky can't provide you with the correct settings to use your own router is because we are unable to offer you any support if you have an issue with a non Sky router.
Have you all been in contact with Samsung? If so, could you tell us what you were advised?
27-06-2013 12:42 AM
Yes have been in contact with Samsung and was advised that the problem must lie with the Sky hub as the phone works fine on all other networks therefore not an issue with the phone.
If Sky could only use a bit of common sense and provide me with my broadband username and password I could simply set-up my old netgear router and use that (which works fine with my phone & also provides better range) the problem would be solved.
If I develop a broadband fault or need technical advice I could simply plug in the Sky Hub when contacting customer services.
However Sky refuse to do so, so now I am going to have to live with this problem for the next 12 months until I can change ISP.
27-06-2013 07:31 AM
Thanks for getting back to us however, I can only repeat what you have already been told I'm afraid.
We do not support Samsung devices and are unable to give you the information you want.
I'm really sorry however the terms and conditions do state that you use your Sky router . Please click on the link below to read all Broadband terms and conditions.
3. The Wireless Router
(d) Sky Broadband must only be accessed via your Wireless Router. Your Wireless Router is not supplied as being capable of being used to access any other internet service.
27-06-2013 03:44 PM
29-06-2013 02:35 PM
Thanks for getting back to us David1983,
I do apologise for the inconvenience and the level of service you have experience so far. Firstly I can confirm there is no known issue with the Samsung Galaxy s3 connecting to our hub. Reading your post I’m not 100% sure if you can connect to WiFi? Does your phone connect then disconnect or does it connect and run slow?
I am keen to help resolve and investigate this issue; can you tell me what troubleshooting you have done? Have you tried changing the wireless channel?
Let me know, we can assist you further.
29-06-2013 06:47 PM - last edited: 29-06-2013 07:16 PM
At the worst it you can not get any sense from *** and from your post it seems you have not had the new service very long, then you should be able to cancel the account and broadband as it is unfit for purpose. Believe you should also get a refund of monies paid.
Couple of alternatives. First are you refering to the router username and password or the broadband username and password.
If router--- open browser and type in ip address of gateway maybee 192.168.1.254 / 192.168.1.1 /192.168.0.1 or sililar (If not sure open dos box (run cmd) and type "ipconfig /all" without quotes and you should see default gatway in the router settings.Most routers come with default username/password somewhere on the router (on mine it is on the base) or the box it came in
Try user name 'admin" and password "sky" if it works lok for security or wpa/wps or similar and you shouls see wifi password there.
If not do a hard reset on router then speak to *** and tell them you had power failure and had to reset router - What are the settings
Final final action if above do not work HIT IT WITH A BIG HAMMER
Just found this explains better than me
Login to your router by typing 192.168.0.1 into your browser address bar and using these details to log into it:
Username - admin
Password - sky
You can change the router name in the WIRELESS setting section, it is called the "Name (SSID)". And your password (called the network key) should be on the same page. Remeber to apply/save you changes before exiting.
30-06-2013 11:31 AM
Thanks for your replys.
It was the actual broadband user name and password that I require, have got the user name and password for the Sky hub and can access it without any problems.
No I had not tried changing the wireless channel but I have now given that a try and so far it has not helped, however I will keep trying different numbers.
Would have thought that when I called customer services last week they might have mentioned this!
30-06-2013 06:27 PM
Sorry I am full of stupid ideas
Have you double checked the sky emails partic the activation one as usually it is in the "small print"
But still cannot see why Sky would not give to to you over the phone
30-06-2013 07:26 PM
30-06-2013 09:56 PM - last edited: 30-06-2013 09:57 PM
I am a bit thick just twigged you have an android phone.
Have a look at app named wifi analyzer, if you haven't already, gives excellent ifo on channel usage , signal strength and overlapping signals.
Best of all it is free
01-07-2013 09:38 PM